Peanut sheller machine is a kind of equipment used to remove peanut shells, which plays a vital role in the process of processing peanuts. When feeding the peanut sheller machine, there are some matters needing special attention to ensure the safe and normal operation of the equipment.

The following will introduce some matters needing attention when feeding the peanut sheller.
Before feeding, peanuts need to be screened and cleaned to remove impurities and damaged peanuts to ensure the smooth feeding process.

Before feeding, it is also necessary to check the equipment under shutdown to ensure that all parts are intact and there is no looseness or damage. In particular, it is necessary to check the key components of the peanut sheller, such as conveyor belt, sheller roller and electric control system, to ensure its normal operation.

Before feeding, it is necessary to adjust the parameters of the peanut sheller. Different specifications and varieties of peanuts need to set different shelling parameters, including rotational speed, feed rate and internal pressure. Adjusting these parameters can improve shelling efficiency and reduce energy consumption.

Before feeding, clean up the working environment to ensure that there are no sundries and obstacles around. This can avoid accidents in the process of feeding. At the same time, it is necessary to ensure that operators wear appropriate work clothes and protective equipment to avoid being hit by peanut shells or debris.

Before starting feeding, the peanuts to be processed need to be evenly placed on the conveyor belt to avoid accumulation or jamming. At the same time, we should pay attention to control the speed and quantity of feeding to avoid equipment blockage or overload caused by too fast or too much.

During the feeding process, the operator should always pay attention to the operation of the equipment to ensure that the equipment will be stopped for maintenance immediately in case of abnormality. In particular, pay attention to the electrical control system of the peanut sheller, cut off the power supply in time in case of failure, and notify the maintenance personnel to handle it.

In addition, after the feeding, the equipment should be cleaned and maintained in time. Remove the peanut shells and debris left in the machine to avoid affecting the next use. At the same time, the equipment should be lubricated and fastened to ensure the normal operation of all components.

In a word, when feeding grain thresher machine, it is necessary to strictly abide by the operating rules and safety regulations to ensure the normal operation of the equipment and the safety of operators. Only in this way can we effectively improve production efficiency, ensure product quality and ensure long-term stable operation of the equipment.